Nec Application And Driver Cd; Nec Os Restore Cd - NEC POWERMATE CT 815 Service And Reference Manual

Uninstall the NEC INFO Center as follows.
At the Windows desktop, click
1.
At the Control Panel, double click
2.
Double click
3.
To reinstall the NEC INFO Center, use the NEC Application and Driver CD (see the following
section, "NEC Application and Driver CD").

NEC Application and Driver CD

Use the NEC Application and Driver CD to reinstall NECC-provided software, including
applications
!
utilities and device drivers
!
the NEC INFO Center (online documentation).
!
You can also use the NEC Application and Driver CD at any time to restore an application,
driver, or utility.
Note
If you perform a full system restore using the NEC OS Restore CD, the full restore
process loads all the factory-installed software that came with the system.
If you add NECC hardware options specified for the system, you can use the NEC Application
and Driver CD to install the drivers for the options.
Install the software from the NEC Application and Driver CD as follows.
Power on the system.
1.
Insert the auto-start Application and Driver CD into the CD-ROM drive. The Selective
2.
Restore screen appears, prompting you to select an application or driver from the list.
Click on an application, driver, or utility in the "Applications/Drivers:" window.
3.
Read the information given in the "Important Setup Information:" window.
4.
Click
5. Install
selection.
Click
6. Exit
Remove the CD from the CD-ROM drive when the installation is complete.
7.

NEC OS Restore CD

Use the NEC OS Restore CD to restore the system to its original factory state if a problem
occurs that causes data loss or corruption. The NEC OS Restore CD provides options for a full
system restore with factory-installed software or for a restore with only the operating system and
drivers. A full restore loads all the factory-installed software.
If you opt to restore only the operating system and drivers, you can use the NEC Application
and Driver CD to select the software you want to load on your system. See the previous section,
"NEC Application and Driver CD," for information on using the Application and Driver CD.
2-22 System Configuration
, point to
Start
Add/Remove Programs
and follow the prompts.
NEC INFO Center
to install the selection. Follow any on-screen instructions to install the
to close the Application and Driver program.
, and click
Settings Control Panel
.
.