Fax Configuration Section; Sip / T.38 Configuration - Multitech FF240-IP User Manual

Chapter 3: Web Management Interface

Fax Configuration Section

SIP / T.38 Configuration

This screen is where you will need to set all of the necessary settings for your FaxFinder IP to work
properly on your network.
If you need to reset all of the SIP and T.38 settings on this screen back to their factory default settings,
click on the Defaults link in the upper right corner. Be aware that the default for many of the boxes is a
blank entry.
Multi-Tech Systems, Inc. FF240-IP Admin User Guide
41