Multitech FF240-IP User Manual page 88

Schedule Options tab
In the options tab you can change the default settings that are used for faxing: Max Attempts,
Fax Priority, Fax Receipt, Try Interval.
Save (button)
Click the save button to make these changes to the FF240-IP unit for this user.
Reconnect
Selecting this option will attempt to reconnect the user to the selected FF240-IP.
Delete
Selecting this will delete the FF240-IP unit from use by this software. There is a delete confirmation
window that will pop-up prior to actual deletion.
Set as Default
Selecting set as default will make the unit clicked the default unit for sending faxes through this
software.
Properties
Selecting properties will bring up a window showing the FF240-IP unit type (FFx20 or FFx30), the IP
address the unit is using and your user name and password. The password is replaced by asterisks for
security.
Multi-Tech Systems, Inc. FF240-IP Admin User Guide
Chapter 5: FaxFinder-IP Operation
88