Fax Configuration Section; Modem - Multitech FaxFinder FF130 Administrator's Manual

Once you have the zipped file, follow the instructions provided by Multi-Tech Support for sending it in.

Fax Configuration Section

Modem

Use this page to configure modems individually or as a group.
Note: To ensure that your faxes comply with federal regulations branding, refer to the
Statement in Appendix D.
Be sure to set the country code for your location as well as look at the routing for your specific setup.
Should you need to adjust some settings for your PBX or local phone lines, many options are available.
Modem Configuration
Use this section to change fax parameters for each FaxFinder port. Click Save when you have finished
changing parameters.
Note: If you change any modem parameters, that modem will be initialized immediately after you
click save. If the modem is currently in use, initialization will begin when the current call is
completed.
FaxFinder Administrator User Guide
Chapter 3: FaxFinder Web Management Interface
Fax Branding
45