Multitech FF240-IP User Manual page 74

2. To add a FF240-IP when the IP address is known, select the FF240-IP model family from the Type
drop-down, enter the IP address "Server Address" field along with your Username and Password.
If you need to use a secure login, tick the 'Use SSL' checkbox.
If the Auto Discover Devices feature was used, you may Right-click and select Add or double Left-
click on the IP address or name of the FF240-IP unit that was detected. Use the 'X' in the upper right
hand corner to close the Auto Discover window after you have added it to the client.
3. Enter, in the appropriate fields, the Username and Password that the client will use when accessing
this FF240-IP unit. If the client is to be associated with multiple FF240-IP units, a different Username
and Password could be established for each. However, in most cases, it is advisable (for the sake of
simplicity and convenience) to use the same Username and Password for all FF240-IP units.
NOTE: The Username entered here must match the entry used in the "Username" field of the Users
screen on the FF240-IP Server. The password entered here must match the password
entered for this user.
The Username and Password are case-sensitive.
Click OK.
Multi-Tech Systems, Inc. FF240-IP Admin User Guide
Chapter 4: Client Installation
74