Multitech FF240-IP User Manual page 35

Add Network Share
After entering and saving a new network shared resource, you will see the message "Network Share
updated" appear at the top of the screen. The network share is a common location when received faxes
may be routed to. For those with access rights to this shared location, all information is accessible for
use.
UNC / Location
Enter the Universal Naming Convention identifier or network location in this box. An example of
a UNC or location would be '//server/service' or '\\server\service.'
Username
Enter the username that has write access to the shared location. This can be a general account
or one specific to the folder that is to be shared.
Password
Enter the password associated with the above username.
Confirm Password
Re-enter the password in order to avoid possible errors in the password previously entered.
Save button
When you have entered your information, be sure to click the save button before navigating
away from this page, else your changes will be lost.
Cancel button
Clicking on the cancel button will cause you to lose all information entered and return you to the
previous screen.
Multi-Tech Systems, Inc.
Chapter 3: Web Management Interface
FF240-IP Admin User Guide
35