Table of Contents
Advertisement
Operation
Basic operations
Selecting a channel
There are a number of ways to select a channel (or digital radio station):
•
Using the number keys on the remote control: If you know the channel number, enter the
number using the number keys on the remote control and then press OK on the remote control.
(If you don't press OK, the channel selected appears after 2 seconds.)
NOTE: The
Some samples of LCN channel numbers are:
1 = Ten network and affiliates
2 = ABC
3 = SBS
7 = Seven network and affiliates
9 = Nine network and affiliates
•
Channel list: Press OK on the remote control. This displays the Quick Select channel list. Press
CH▼ or CH▲ on the remote control to select the channel you want, press OK and then press
EXIT.
If you have placed channels into groups (see "Grouping channels" on page 35), the channels
in the first group are listed on the Quick Select channel list. You can then press VOL
to display each group of channels in turn.
•
Favourites list: Press FAV on the remote control to see a list of channels you have added to a
favourites list. Press CH▼ or CH▲ on the remote control to select a channel and then press OK.
See "Setting favourites" on page 34 for instructions on creating a favourites list.
•
Scroll: Press CH▼ or CH▲ on the remote control to scroll through the channels in channel
number order. (You can also scroll through the channels in order by pressing the channel up
and channel down buttons on the front panel of the
•
By EPG: Press EPG on the remote control, select the channel from the electronic program guide
(EPG), press OK and then EPG, MENU or EXIT. The EPG is explained on page 37.
•
Previous channel: Press the RECALL button to display the previous channel.
uses the Logical Channel Numbering system (LCN) by default.
.)
22
or VOL
Advertisement
Table of Contents
