C: Cvbs (Composite) Using The Supplied Rca Red-White-Yellow Lead; Step 3: Optional Connections; Dolby Digital; Connecting A Recording Device (Such As A Vcr) - Strong SRT 5023X User Manual

Digital terrestrial television receiver

Table of Contents

C: CVBS (Composite) using the supplied RCA red–white–yellow lead

Using the appropriate colour-coding on socket 7 and socket group 9 you can connect to your TV

with the supplied RCA cable. This gives you CVBS (Composite Video) and MPEG-2 stereo audio.

For video, connect the yellow RCA lead between the yellow video socket (socket 7) on the

and the corresponding socket on your TV.

For right audio, connect the red RCA lead between the red audio socket in socket group 9 on the

and the corresponding socket on your TV.

For left audio, connect the white RCA lead between the white socket in socket group 9 on the

and the corresponding socket on your TV.

Dolby digital bitstream audio S/PDIF can be achieved using a coaxial cable. (This cable is not

supplied.) The cable should be connected between socket 5 on the

socket on your Dolby Digital decoder amplifier. See "Multi-language and Dolby Digital

broadcasting" on page 23 for instructions on how to choose Dolby audio.

To connect a recording device (such as a VCR), connect an RF cable (not supplied) between the

LOOP OUT socket on the

(Another cable should be connected between the recording device and the TV. For instructions,

consult the user's manual that came with your recording device or TV.)

(socket 2) and the ANT IN connector on the recording device.

and the S/PDIF

Table of Contents