Edit Channel Details - Strong SRT 5023X User Manual

5. Press CH▼ or CH▲ until a channel you want to add to a group is highlighted.
6. Press the number key on the remote control that corresponds to the appropriate group shown
at the right side of the window: 2 for News, 3 for Science, 4 for Sport and so on. The
corresponding icon appears beside the channel in the Group column to indicate that the
channel has been grouped.
To remove a channel from a group, select it and press 1 on the remote control.
You don't have to add every channel to a group. Those that you don't add to a group are
automatically placed in the None group.
7. To add another channel to a group, repeat this procedure from step 5.
8. Press OK. The channels are now assigned to the groups you chose.
9. Press EXIT to return to TV viewing.
To check that the stations have been assigned to groups, press OK during normal TV viewing.
The Quick Select channel list first shows just the channels in your first group. Press VOL
to see another group's channels. You can select a channel in a group and press OK to start
watching that channel.

Edit channel details

Follow this procedure if you want to correct wrong PID details of a channel you have already
added to your channel list.
1. Press MENU on the remote control. The Digital TV menu appears.
2. Press OK. The first item in the sub-menu—Channel Manager—is highlighted.
3. Press OK. The Channel Manager menu appears.
4. Press CH▼ or CH▲ until Edit Channels is highlighted and then press OK. The Edit Channels
window appears.
36
or VOL