Table of Contents
Advertisement
•
the OSD transparency (that is, how much of the picture behind an information panel will be
visible through the information panel)
•
the OSD language
•
the first and second preferred audio languages (for channels that broadcast programs in
more than one language.
5. Select an option you want to change. If necessary, press CH▼ or CH▲ until the option is
highlighted.
6. With the option you want to change highlighted, press VOL
allowable values (shown in the panel at the right of the screen). Stop when the value you want
is displayed.
7. If there is another OSD option you want to change, repeat this procedure from step 5.
8. When you have finished configuring the OSD settings, press OK.
The Configuration menu re-appears. You can continue with other set-up tasks (see below), or
press EXIT to return to TV viewing.
Setting the properties of the TV
1. Press MENU on the remote control. The Digital TV menu appears.
2. Press OK. The first item in the sub-menu—Channel Manager—is highlighted.
3. Press CH▼ until Configuration is highlighted, and then press OK. The Configuration menu
appears.
4. Press CH▼ until TV is highlighted, and then press OK. The TV window appears.
On this screen you can control the following settings:
•
Display Mode – PAL, NTSC or AUTO
•
Aspect ratio – 4:3 (Pan & Scan or Letterbox)
or 16:9
•
Video output – CVBS (Composite), S-Video
or YCbCr (Component)
5. Select an option you want to change. If necessary, press CH▼ or CH▲ until the option is
highlighted.
Note that the Video Output option should match the type of connection you have between
the
and the TV.
or VOL
•
Brightness
•
Contrast
•
Hue
•
Saturation
17
to step through the
Advertisement
Table of Contents
