Processor Support; Figure 48. Intel - Intel SR1500 - AXXMINIDIMM DDR-2 RAID Controller Cache Memory Manual

Intel® Server System SR1550AL
Description
A BIOS Bank Select Jumper
®
B Intel 6321ESB I/O Controller Hub
C IO Module Option Connector
D POST Code Diagnostic LEDs
®
E Intel Adaptive Slot – Full Height
F PCI Express* Riser Slot – Low Profile
G System Identification LED - Blue
H External IO Connectors
I Status LED – Green / Amber
J Serial 'B' Port Configuration Jumper
K System Fan #4 Header
L System Fan #3 Header
M FBDIMM Slots
®
N Intel 5000P Memory Controller Hub (MCH) or
®
Intel 5000X Memory Controller Hub (MCH)
O CPU #1 Connector
P CPU #2 Connector
Q CPU #1 Fan Header
R Voltage Regulator Heat Sink
S CPU #2 Fan Header
T Bridge Board Connector
U ATA-100 Optical Drive Connector (Power+IO)
11.1.1

Processor Support

The server system supports one or two Dual-Core Intel
system bus speeds of 667 MHz, 1066 MHz, and 1333 MHz, and core frequencies starting at
2.67 GHz. Previous generations of the Intel
board.
For additional information on processor compatibility and a list of supported processors, please
®
see the Intel Server Board S5000PAL/S5000XAL Technical Product Specification (TPS).
Revision – 1.3
®

Figure 48. Intel

Server Board S5000PAL Components
Intel order number D31982-006
V System Fan #2 Header
W CPU Power Connector
X Main Power Connector
Y Battery
Z Power Supply Management Connector
AA Dual Port USB 2.0 Header
BB System Fan #1 Header
CC SSI 24-pin Control Panel Header
DD SATA 0
EE SATA 1
FF SATA 2
GG SATA 3
HH SATA 4
II SATA 5
JJ SATA SW RAID 5 Activation Key Connector
®
KK Intel Remote Management Module (RMM)
Connector
LL System Recovery Jumper Block
MM Chassis Intrusion Switch Header
NN 3-pin IPMB Header
®
OO Intel Local Control Panel Header
PP Serial 'A' Header
®
QQ Intel RMM NIC Connector
® ®
Xeon
® ®
Xeon processor are not supported on this server
Supported Intel® Server Boards
Description
processors 5000 sequence, with
73