Peripheral and Hard Drive Sub-System
6.
Peripheral and Hard Drive Sub-System
The system can be configured to support different hard drive and peripheral configurations. The
peripheral/hard drive sub-system consists of a drive bay, supporting a slim-line IDE optical drive,
up to eight 2.5" SATA/SAS hard drives, two types of mid-planes, and a hot-swap backplane.
This chapter describes the details for each sub-system component.
6.1
Slimline IDE Optical Drive Bay
The system provides a slim-line drive bay that is designed to support a single slim-line IDE
optical drive. A plastic guide is attached to the slim-line drive to provide blind mated tool-less
installation of the device, for easy installation into and removal from the chassis. Once inserted
into the drive bay, the assembly locks into place. For removal, the chassis top cover must be
removed and the locking latch disengaged.
40
A
Slimline Optical Drive Bay
B
Mini Control Panel Bay (Filler Panel Shown)
C
Control Panel Bay or HDD bays #7 and #8
2.5" Hard Drive Bays (Up to eight possible with mini control
D
panel)
Figure 26. Slimline Optical Drive Assembly
Intel order number D31982-006
Intel® Server System SR1550AL
Revision – 1.3