Settings Common To Tcp/Ipv4 And Tcp/Ipv6 - Canon image RUNNER 3245 Getting Started Manual

[On] for <Register Stateful Address>: You can automatically register a stateful address in the DNS server
using dynamic DNS updating.
Windows 2000 Server and Windows Server 2003 do not support DHCPv6 servers.

Settings Common to TCP/IPv4 and TCP/IPv6

This section describes the procedure for specifying the settings common to TCP/IPv4 and TCP/IPv6
using the control panel. Specify the settings required for your network environment. If you want to
use both TCP/IPv4 communications and TCP/IPv6 communications, specify the settings required for
both protocols.
After performing this procedure, follow the procedure in "Confirming TCP/IPv4 Settings, " on p. 5-24
and "Confirming TCP/IPv6 Settings, " on p. 5-25 to check whether the network settings are correct.
1
On the TCP/IP Settings screen, press [ LPD Print Settings] → specify the
following.
[On]: You can use LPD as the print application.
•
You can only output a banner page if you are using the imageRUNNER 3245i/3235i, or the imageRUNNER
3245/3235/3230/3225 with the optional PCL Printer Kit or the optional PS Printer Kit.
•
Output of a banner page is set on a print-job basis. Even if [On] is selected for < LPD Banner Page >, a banner
page cannot be output for a print job unless it is set.
Protocol Settings 5-17
5