Canon image RUNNER 3245 Getting Started Manual page 171

5
Select [On] or [Off] for < Use SSL>.
[On]: Uses SSL (Secure Socket Layer) to communicate.
[Off ]: SSL is not used to communicate.
•
Any changes made to <Use SSL> in <Use HTTP> in MEAP Settings are also applied to <Use SSL> in Remote
UI in System Settings (from the Additional Functions screen).
•
To set <Use SSL> to 'On' , it is necessary to set the key pair and server certificate necessary for performing
Encrypted SSL communications in Certificate Settings in TCP/IP Settings (from the Additional Functions
screen). For information on generating the key pair for SSL, see e-Manual > Network.
6
Press [OK].
The selected mode is set.
7
Press [Done] repeatedly until the Basic Features screen appears.
8
Turn the main power of the machine OFF, wait 10 seconds, and then turn
the power ON.
The HTTP setting is activated only after the machine is restarted. For instructions on how to turn ON/OFF
the machine, see Chapter 1, "Before You Start Using This Machine, " in Troubleshooting.
Before Starting SMS (Preparations)
13
13-9