Canon image RUNNER 3245 Getting Started Manual page 96

5
5-36 Setting Up a Computer as a File Server
•
To use the host name of the above example for [Host Name], it is necessary to use a DNS server. (This
applies even if the machine and the FTP server are in the same subnet.) If no DNS server is available, the
host name setting should be specified using the IP address of the FTP server.
•
Up to 128 alphanumeric characters can be entered for [Host Name] on the control panel. Also, up to 255
alphanumeric characters can be entered for [Folder Path].
•
If you set [Host Name] using DNS with both [IPv4 Settings] and [IPv6 Settings] set to 'On' on the TCP/IP
Settings screen, IPv6 communication is used when sending to FTP servers.
•
If you switch the language of the touch panel display, [Host Name] and [Folder Path] may not be displayed
correctly.
•
If you want to send to an IPv4 host using an FTP port other than port 21, set [Host Name] using the
following format:
<IPv4 address of FTP server>:<Port number>
Example: 192.168.1.21:21000
•
To send to an IPv6 host, set [Host Name] using the following format:
<IPv6 address>:<Port number>
Example: [5aed:90a0:bc05:01d2:568a:2fc0:0001:12ee]:21000