Canon image RUNNER 3245 Getting Started Manual page 56

An SNMP v. 3 user with the following settings is registered by default. Delete or change these settings as necessary.
- User: initial
- MIB Access Permission: Read/Write
- Security Settings: Auth Yes/Encrypt Yes
- Authent. Algorithm: MD5
- Authent. Password: initial
- Encryption Password: initial
4
4-14 Communication Environment Setup
If you want to add an SNMP v. 3 user:
☐ Press [User Settings] → [Register] → specify the user name, MIB permissions, and security settings.
If you select [Auth Yes/Encrypt Yes] from the Security Settings drop-down list, select the
authentication algorithm → enter the passwords for authentication and encryption. If you select
[Auth. Yes/Encrypt. No] from the Security Settings drop-down list, select the authentication algorithm
→ enter the password for authentication.
If you want to confirm or change the SNMP v. 3 user settings:
☐ Press [User Settings] to select the user whose settings you want to confirm or change → press
[Details/Edit].
Confirm the displayed information → change the settings if necessary.
If you want to erase an SNMP v. 3 user:
☐ Press [User Settings] to select the user whose settings you want to erase → press [Erase].
If you want to change the status of an SNMP v. 3 user:
☐ Press [User Settings] → select the user whose status you want to change → press [User On/Off ].