Canon image RUNNER 3245 Getting Started Manual page 52

2
4
4-10 Interface Settings
On the Network Settings screen, press [ Ethernet Driver Settings] → specify
the following.
If you want the machine to automatically determine the communication mode and
Ethernet type:
☐
<Auto Detect>: [On]
If you reconnect the network cable (for example, reconnect the cable to a different Ethernet hub)
with the machine's main power switch ON, the Auto Detect function will not work even if you set
<Auto Detect> to [On]. Turn OFF the machine, wait at least 10 seconds, and then turn it ON. (Connect
the cable with the machine's main power switch OFF.)
The machine automatically determines the Ethernet type. Press [On] unless you want to specify a particular
Ethernet setting.
If you want to manually set the communication mode and Ethernet type for specify-
ing a particular Ethernet type setting:
☐
<Auto Detect>: [Off ].
Select the appropriate items for <Communication Mode> and <Ethernet Type>, according to the
network environment you are using.
To connect with 1000Base-T, select [Full Duplex] for <Communication Mode>.