Connecting The Machine To A Computer Or Network; Connecting To A Network - Canon image RUNNER 3245 Getting Started Manual

Connecting the Machine to a Computer or Network

The machine can be connected to a computer or network with a USB cable or 10Base-T/100Base-
TX/1000Base-T Ethernet cable.
•
External USB devices (e.g., memory, keyboard, mouse, etc.) are not supported.
•
A USB cable or network cable are not included in this package. Please obtain a suitable cable for your computer or
network.

Connecting to a Network

The machine supports TCP/IP, AppleTalk, and NetWare, which enables it to be used by Windows,
Macintosh, UNIX, and Linux computers. It also has a 10Base-T / 100Base-TX /1000Base-T connector that
can be used on most LANs.
When using 10Base-T/100Base-TX, connect the machine's RJ-45 connector to a hub port using
a Category 5 twisted pair LAN cable. When using 1000Base-T, it is recommended you use an
Enchanced Category 5 twisted pair LAN cable.
PC with
100Base-TX/1000Base-T
Connector
PC with
10Base-T Connector
Ethernet Cable
Hub

Connecting the Machine to a Computer or Network

4
4-3