Fax Settings - Canon image RUNNER 3245 Getting Started Manual

Fax Settings

This section describes the important setting registrations and procedures that must be done before
the machine is used for sending operations.
According to recent amendments to the FCC (Federal Communications Commission) rules governing
the use of facsimile equipment in the United States, the following sender information must be
printed on every facsimile transmission:
•
Your fax number
•
Your personal name or company name
•
Time and date of transmission
If you attempt to use the machine without registering the necessary information correctly, the machine may not
function properly.
A fax board is required to send faxes.
Setting the Telephone Line Type
To set the type of telephone line connected to the machine with the optional fax board installed, check
9
whether it is a rotary dial (rotary pulse) or a touch-tone type and make the correct setting. (See e-Manual >
Send/Fax.)
If you have added an additional line to the machine, perform the same registration procedure for the
additional lines, too. (See e-Manual > Send/Fax.)
9-2

Fax Settings