Motion Computing C5v User Manual page 70

3. Press the camera, Windows Security, and dashboard buttons, simultaneously. For the
The tablet will not enter Hibernation mode
•
Hibernation might not be enabled. Enable hibernation by adjusting the power button
behavior from Motion Dashboard. See "Changing how the power button functions" on
page 45.
The tablet does not return from Hibernation while on battery power
•
The battery might be depleted. Plug the tablet in to AC power.
The power button is blinking but nothing is happening
•
The tablet is in sleep mode. Press the power button to wake up the tablet. To power off
the tablet completely, you can press and hold the power button
However, this is strongly discouraged. Under normal conditions, power off the tablet
from the Start menu by tapping Shut down.
The display goes black while the tablet PC is still turned on
•
The tablet might have turned off the display to save power. To restore the display, touch
the screen with your finger or the pen.
•
The tablet might have gone into Sleep mode. Press and hold the power button
about one second.
•
The tablet might have gone into low-battery Hibernation mode. In Hibernation mode,
the power status light is off. Plug the tablet in to AC power, then press and hold the
power button for about one second.
64 Chapter 4 Troubleshooting and FAQs
locations of these button, see below.
Dashboard button
Windows Security button
camera button
about 5 seconds.
for
Troubleshooting