Motion Computing C5v User Manual page 15

Enable wireless from the Motion Dashboard
The first task when setting up wireless is to enable the wireless network adapters from the
Motion Dashboard. The Dashboard is a Motion Computing application for configuring your
C5v/F5v Tablet PC.
To enable wireless adapters
1. Open the Motion Dashboard. From the Windows task bar, tap the Motion Dashboard
icon
2. Tap Wireless.
3. Tap the check boxes next to all wireless networks you intend to use:
•
•
•
N : To extend battery life, enable only the wireless devices that you will be using.
OTE
Set up Wi-Fi
Connect to the Internet and other computers wirelessly over Wi-Fi.
To set up Wi-Fi
1. Enable
2. From the notification area, tap the wireless network icon
3. Tap the desired wireless network from the list of available networks.
Set up mobile broadband with GPS
If you purchased your C5v/F5v with the optional mobile broadband module, you can
connect to high-speed cellular networks worldwide. With the mobile broadband module
and a data plan from one of several cellular network providers, you have full Internet access.
To set up mobile broadband
1. Enable
2. Start the Motion Connection Manager. From the Start menu, select All Programs >
Motion Computing > Motion CM.
3. Tap the help icon
4. Follow the instructions to set up a network profile and connect to the mobile broadband
network.
Chapter 1 Getting Started
.
Enable Bluetooth Internal Wireless
Enable 802.11 Internal Wireless
Enable Mobile Broadband with GPS (If this option is not listed, your C5v/F5v does
not have mobile broadband capabilities.)
Wi-Fi from the Motion Dashboard.
mobile broadband from the Motion Dashboard.
and select the help topic, Setting up mobile broadband.
.
Where to begin with your C5v/F5v 9