Changing How The Power Button Functions; Using The Fingerprint Reader - Motion Computing C5v User Manual

Changing how the power button functions

When you press and release the power button it can go into one of the following modes:
•
Sleep—The tablet pauses all activity immediately and quickly resumes when awakened.
This saves power when you are away from your tablet for a short time. However, you will
lose unsaved data if there's a power failure.
•
Hibernate—The tablet saves the contents of memory to the solid state drive and shuts
down. Pressing the power button restores the desktop exactly as you left it. Hibernate
consumes about as much power as a night light and takes less time to restart than the
Shut down option.
•
Shut down—Tablet shuts down. Pressing the power button reboots the tablet.
By default, the tablet goes to sleep when you press and release the power button
wake up your tablet, simply press and release the power button again. You can put the
tablet in hibernate mode or shut it down completely from the Start menu.
You can change how the power button behaves when it is pressed either to hibernate or to
shut down the tablet. You can set the behavior individually—depending on whether the
tablet is running on battery or plugged in.
To change what happens when the power button is pressed
1. Open
2. Tap Power.
3. Under Power Switch on battery, select what you want to happen when the power
switch is pressed while the tablet is running on battery.
4. Under Power Switch plugged in, select what you want to happen when the power
switch is pressed while the tablet is plugged into an outlet.

Using the fingerprint reader

Using the fingerprint reader, you can log on to the tablet by scanning your fingerprint
instead of entering a password. This feature provides another level of security for the tablet.
Chapter 2 Using your C5v/F5v
Motion Dashboard
.
scan fingerprint
fingerprint reader
Using the fingerprint reader 45
. To