Figure 34. Base Plate And Paper Spindle For Remote Mounting Applications - TransAct Epic 430 Maintenance Manual

Assembly and Disassembly
Remote Mounting Applications
Paper Spindle

Figure 34. Base Plate and Paper Spindle for Remote Mounting Applications


For remote mounting applications, base plates are attached to the printer
mechanism (shown) and the base frame, using M3 Sems screws in
corresponding holes.

For applications where the Electronics Base Assembly is mounted
remotely, a separate Paper Spindle is attached to the Printer Mechanism,
using screws as shown.
Page 68
Base Plate
43-06955 - Rev Q
Mounting screws