Figure 28. Top Cover Assembly Attached To Left Side Assembly - TransAct Epic 430 Maintenance Manual

Step 6. Add Top Cover Assembly
Attachment studs (2 of 3)

Figure 28. Top Cover Assembly Attached to Left Side Assembly

• Connect Top Cover Assembly to Left Side Assembly by positioning its
holes over corresponding studs, and then fastening three of these studs
(all but the upper right-hand corner, while looking at the outside of the Left
Side Assembly.
Left Side Frame Assembly
43-06955 - Rev Q
Assembly and Disassembly
Top Cover Assembly
Ribbon Cable
Platen
Feed Motor Harness
Page 63