Remote Base Cover
TM
The Epic 430
to be mounted remotely from the electronics base. In such a case, a remote
base cover is attached to the base of the printer mechanism. The diagram
shows mounting holes and dimensions for this base cover, while the
subsequent image shows this base cover attached to the printer mechanism.
Top:
2x M4x 0.7 screws.
2x Ф.200" thru holes.
.200
-4PL
Screw Holes
.390
3.096
2.000
.548
Figure 8. Optional Remote Base Cover
Page 38
printer can optionally be configured for the printer mechanism
-TYP
1.390
.718
43-06955 - Rev Q
M4 Mounting PEM's-4PL
2.500
3.936
Screw holes