NetComm NB304N User Manual page 33

QoS Classification
You can add or remove QoS Classification rules.
To delete a QoS classification rule, click the Remove checkbox next to the selected classification rule and click Remove.
Click Add to create a Network Traffic Class Rule.
Enter the following appropriate parameters for the entered QoS classification:
PARAMETER
Traffic Class Name
Rule Order
Rule Status
Class Interface
Ether Type
Source MAC Address
Destination MAC Address
Destination MAC Mask
Frame size Range for Bridged Interface
Assign Classification Queue
DSCP or TOS Marking options
Mark 802.1p priority
Tag VLAN ID
Click Apply/Save to save the new QoS Classification configuration settings.
NetComm NB304N – ADSL2+ Wireless N300 Modem
33
Enter a name to identify the entered QoS classification rule
Select the QoS classification rule order
Select to enable or disable the entered QoS classification rule
Select the interface to apply the entered QoS classification to
Select the type of Ethernet traffic to apply the entered QoS classification to
Enter the source MAC address to apply the entered QoS classification to
Enter the destination MAC address to apply the entered QoS classification to
Enter the destination MAC Mask to apply the entered QoS classification to
Enter the size range for packets to which the entered QoS classification will be applied to
Select the appropriate interface classification queue to apply the entered QoS classification to
Select to use DSCP or TOS marking for the entered QoS classification
Select the priority the entered QoS classification will have applied to it
Enter the VLAN tag ID to apply the entered QoS classification to
DEFINITION
www.netcomm.com.au
YML304X