NetComm NB304N User Manual page 34

NETCOMM GATEWAY™ SERIES – NB304N – ADSL2+ Wireless N300 Modem Router
Routing
Default Gateway
The router will accept the first received Default Gateway assignment from one of the PPPoA, PPPoE or DHCP enabled PVC(s).
Alternatively, you can manually select which service you would like to use as a default gateway.
Select from the list of configured WAN Services as displayed below.
After selecting the applicable WAN Service interface, click Apply/Save to save the new default gateway settings.
Static Route
Use this if your LAN consists of multiple subnets and you want to manually define the path to transmit data on.
To delete a static route, click the Remove checkbox next to the selected static route and click Remove.
To create a new Static Route, click Add. The Routing-Static Route Add page will shows up.
Enter the following parameters to enter a new Static Route:
PARAMETER
IP Version
Destination IP Address/Prefix length
Interface
Gateway IP Address
Metric
Click Save/Apply to save the new static route entry.
YML304X
www.netcomm.com.au
Select the IP Version to apply the static route to.
Enter the destination IP Address / IPv6 prefix length to apply the static route to.
Select the interface to apply the static route to.
If you wish to use a specific gateway to reach the destination network, enter the IP address of the gateway.
Enter the metric (traffic priority/weighting) to be applied to the static route.
DEFINITION
NetComm NB304N – ADSL2+ Wireless N300 Modem
34