Wireless Bridge; Station Info - NetComm NB304N User Manual

Wireless Bridge

Wireless Bridge allows you to configure the router's access point as a bridge.
Select the mode for the Wireless Access Point built into the NB304N. When selecting 'Wireless Bridge' mode, you can also specifiy
which wireless networks will be allowed to connect to the NB304N by using the 'Bridge Restrict' option and then entering the
applicable MAC Addresses of the other wireless access points.
Click Apply/Save to save the new wireless bridge configuration settings.
Advanced
Advanced Wireless allows you to configure detailed wireless network settings such as the band, channel, bandwidth, transmit
power and preamble settings.
Click Apply/Save to save any changes to the wireless network settings configuration.

Station Info

This page shows the MAC address of authenticated wireless stations that are connected to the NB340N and their status
YML304X
NetComm NB304N – ADSL2+ Wireless N300 Modem
45 www.netcomm.com.au