NetComm NB304N User Manual page 19

ATM Interface
To remove a currently configured ATM Interface, Click the remove checkbox corresponding to the chosen interface and click
Remove.
To Add a new Interface, click the add button and enter the appropriate configuration information as shown below:
PARAMETER
VPI/VCI
DSL Latency
DSL Link Type
Connection Mode
Encapsulation Mode
QoS Settings
Click Apply/Save to save the new Interface.
NetComm NB304N – ADSL2+ Wireless N300 Modem
19
Enter the PVC identifier for your service. This will usually be 8/35 for users in Australia.
Select the DSL latency path you wish to use.
Select the type of connection – PPPoE (EoA), PPPoA or IPoA
Select the type of connection
Select the type of encapsulation utilised by your service
Select the appropriate Quality of Service settings to apply to this connection
DEFINITION
YML304X
www.netcomm.com.au