Mac Filter - NetComm NB304N User Manual

NETCOMM GATEWAY™ SERIES – NB304N – ADSL2+ Wireless N300 Modem Router
Security
The NB304N supports all encryptions within the 802.11 standard. The factory default is WPA2-PSK. The NB304N also supports
WPA, WPA-PSK, WPA2, WPA2-PSK. You can also select to enable WPS mode.
The following parameters are available:
PARAMETER
Enable WPS
Select SSID
Network Authentication
WPA/WAPI passphrase
WPA Group Rekey Interval
WPA/WAPI Encryption
WEP Encryption
Click Apply/Save to save the new wireless security configuration settings.

MAC Filter

MAC Filter allows you to add or remove the MAC Address of devices which will be allowed or denied access to the wireless
network. Select to either allow or deny access to the MAC addresses listed.
To delete a MAC filter entry, click the Remove checkbox next to the selected filter entry and click Remove.
Click Add to add a MAC Address Filter.
Enter the MAC Address to be filtered and click Apply/Save to save the new MAC Address filter settings.
YML304X
www.netcomm.com.au
Select to enable or disable the WPS function of the NB304N.
Select the SSID to apply the security settings to.
Select the Wireless security type to use with the wireless network.
Enter the security key to use with the wireless network.
Enter the group rekey interval. This should not need to changed.
Select the type of encryption to use on the wireless network.
Select to utilise WEP encryption on the wireless network connection.
DEFINITION
NetComm NB304N – ADSL2+ Wireless N300 Modem
44