Networking
The Networking section provides configuration options for Wireless WAN, LAN, Routing and VPN connectivity.
Wireless WAN
Data connection
The data connection page allows you to configure and enable/disable the connection profiles. There are six
profiles that you may configure, however, only one of them may be enabled at any point in time. To access this
page, click on the Networking menu, and under the Wireless WAN menu, select the Data connection item.
I T E M
Profile name list
Default
NWL-25 – 4G LTE Light Industrial M2M Router – User Guide
UG01033 v1.1 June 2018
Figure 18 – Data connection settings
Sets the corresponding profile to be the default gateway for all
outbound traffic except traffic for which there are configured
static route rules or profile routing settings.
D E F I N I T I O N
24 of 165
© NetComm Wireless 2018