Replacing The Maintenance Tank; Confirming The Free Space Of The Maintenance; Tank - Epson Stylus Pro 7890 User Manual

Epson Stylus Pro 9890/9908/7890/7908
Replacing the
Maintenance Tank
The maintenance tank absorbs ink discharged
when cleaning the print head. There are two
maintenance tanks placed on the left and right for
Epson Stylus Pro 9890/9908 and one placed on
the right for Epson Stylus Pro 7890/7908. You
need to replace the maintenance tank when the
LCD panel instructs to do so.
Confirming the free space of
the maintenance tank
Using the printer's control panel
The free space of the maintenance tank is always
displayed on the LCD panel.
See "Display" on page 14
You can check the free space in the PRINTER
STATUS menu. You need to check it before
printing a lot of data. If the maintenance tank has
not enough empty space, prepare a new one.
See "Using the Menu mode" on page 16
See "PRINTER STATUS" on page 24
Using the printer driver
You can check the free space of the maintenance
tank on your computer by using EPSON Status
Monitor. The instructions are the same as
confirming the ink cartridge remaining.
See "Using the printer driver" on page 67
User's Guide
Maintenance
Replacing the maintenance

tank

Be sure to use a maintenance tank that is
supported with this printer.
See "Options and Consumable Products" on
page 62
Caution:
c
Do not replace the maintenance tank while
printing data.
A
Turn off the printer.
B
Take a new maintenance tank out of the
package.
C
Put your hand on the handle of the
maintenance tank, then gently pull it
straight out.
D
Put the used maintenance tank in the
plastic bag provided with the replacement
cartridge, and dispose of it properly.
71