Initialization; Standards And Approvals - Epson Stylus Pro 3800 User Manual

EPSON Stylus Pro 3800

Initialization

Hardware initialization at power on
Software initialization when the
ESC@ (initialize the printer)
command is received
Panel button initialization by
pressing the Cancel/Reset button
on the control panel for 3 seconds,
or SoftReset is specified from USB

Standards and Approvals

Safety
EMC
User's Guide
The printer mechanism is set to its initial state.
The input data buffer and print buffer are cleared.
The printer returns to the default condition last set.
The print buffer is cleared.
The printer returns to the default condition last set.
Print head capping occurs.
Paper is ejected, if any.
The input data buffer and print buffer are cleared.
The printer returns to the default condition last set.
UL 60950-1
CSA 22.2 No. 60950-1
Low Voltage Directive 73/23/EEC
FCC part 15 subpart B class B
CSA C108.8 class B
AS/NZS CISPR 22 Class B
EMC Directive 89/336/ECC
EN 60950-1
EN 55022 Class B
EN 55024
EN 61000-3-2
EN 61000-3-3
Product Information
185