Aligning The Print Head Manually - Epson Stylus Pro 3800 User Manual

EPSON Stylus Pro 3800
4. Press the Paper Feed/Down d or Ink Cover Open/Up u button to select AUTO, and
then press the Menu/Right r button.
5. Press the Paper Feed/Down d or Ink Cover Open/Up u button to select the paper
type loaded in the printer from PREM._GLOSSY/LUSTER, P_Q_INK_JET_PAPER, or
ENHANCED_MATTE_PAPER, and then press the Menu/Right r button.
PREM._GLOSSY/LUSTER
P_Q_INK_JET_PAPER
ENHANCED_MATTE_PAPER
6. Press the Enter
alignment starts automatically.
After the head alignment is completed, the printer exits Menu mode and returns to the
READY status.

Aligning the print head manually

When you want to use the non-Epson special media, you can perform the head alignment
manually. To perform head alignment manually, follow the steps below.
1. Press the Menu/Right r button to enter Menu mode.
2. Press the Paper Feed/Down d or Ink Cover Open/Up u button to display
HEAD ALIGNMENT, and press the Menu/Right r button.
3. Press the Paper Feed/Down d or Ink Cover Open/Up u button to select MANUAL, and
then press the Menu/Right r button.
4. Press the Paper Feed/Down d or Ink Cover Open/Up u button to select actual paper
thickness value between 0.1 mm and 0.5 mm.
5. Press the Menu/Right r button to register your value.
User's Guide
Premium Glossy Photo Paper
Premium Luster Photo Paper
Photo Quality Ink Jet Paper
Enhanced Matte Paper
Archival Matte Paper
button to start printing. After printing is complete, the head
111
The Control Panel