Lights - Epson Stylus Pro 3800 User Manual

EPSON Stylus Pro 3800
6 Menu/Right button r
7 Enter button

Lights

This section describes the functions of the lights on the control panel.
The lights let you know the status of the printer and the type of an error when it occurs.
Light
8 Power light (green)
9 Paper status light (red)
10 Ink status light (red)
Note:
When a service call error occurs, all the lights are flashing.
User's Guide
Enters Menu mode when pressed in the READY state. When
pressed in Menu mode, a desired menu can be selected.
Enters PRINTER STATUS menu if pressed during printing.
Cleans the print head if pressed and held for 3 seconds.
Sets the selected parameter in the selected item in Menu
mode.
Executes the item if the selected item is for execution only.
Description
On:
The printer is in the READY status.
Flashing:
The printer is printing.
The printer is cleaning the print head.
The printer is drying ink on the printed paper.
Off:
The printer is off.
On:
No paper is loaded in the paper source.
The loaded paper is too thick for head cleaning.
Flashing:
Paper is jammed.
Paper is not loaded straight.
Paper is not detected.
Cut sheet is not ejected correctly.
On:
The installed ink cartridge is expended.
The installed ink cartridges cannot be used with this printer.
The maintenance cartridge is full.
Flashing:
The installed ink cartridge is nearly expended.
The maintenance cartridge is nearly full.
96
The Control Panel