Platen Gap - Epson Stylus Pro 3800 User Manual

EPSON Stylus Pro 3800
CUSTOM PAPER
This menu contains the following items. To make the paper setting, see "Making the paper
settings" on page 113.
PAPER NUMBER
When you select STANDARD, the printer determines paper thickness automatically. You can
also select No. X (X can be any number between 1 to 10) to register the following settings
or to recall the following settings you have made.
❏ Paper type
❏ Platen gap
❏ Thickness pattern
❏ Thickness number
❏ Paper feed adjustment
❏ Drying time
Note:
If you select STANDARD, the printer prints data according to the driver settings. If you select No. X,
the control panel settings override the driver settings.
PAPER TYPE
You can select paper type from MATTE THICK, MATTE THIN, PHOTO PLAIN, FINE ART PAPER,
or REMOTE PANEL PAPER. REMOTE PANEL PAPER appears only when the Custom Paper is
registered from EPSON LFP Remote Panel.

PLATEN GAP

You can adjust the distance between the print head and paper. Normally, leave this set to
STANDARD. If you find that printed images are smeared, select WIDE. Select NARROW for
printing on thin paper, or WIDER for printing on thick paper.
Note:
The setting will return to STANDARD after you turn the printer on and off.
THICKNESS PATTERN
You can print the paper thickness detection pattern. If you select STANDARD in
PAPER NUMBER, the pattern is not printed.
User's Guide
106
The Control Panel