Making The Paper Settings - Epson Stylus Pro 3800 User Manual

EPSON Stylus Pro 3800

Making the paper settings

You can register and recall your own paper settings according to any media.
The paper settings you can make are:
❏ Paper type
❏ Platen gap
❏ Thickness pattern
❏ Thickness number
❏ Paper feed adjustment
❏ Drying time
Registering the settings
To register the paper settings, follow the steps below.
1. Load the paper that you want to check.
2. Press the Menu/Right r button to enter Menu mode.
3. Press the Paper Feed/Down d or Ink Cover Open/Up u button to display
CUSTOM PAPER.
4. Press the Menu/Right r button to display PAPER NUMBER.
5. Press the Menu/Right r button, and then press the Paper Feed/Down d or Ink Cover
Open/Up u button to select STANDARD or the number (No. 1 to No. 10) you want to
register as the setting.
If you use Epson special media, select STANDARD. You do not need to make the settings
below because STANDARD automatically determines the paper thickness.
6. Press the Enter
7. Select PAPER TYPE, and then press the Menu/Right r button. Press the Paper
Feed/Down d or Ink Cover Open/Up u button to select MATTE THICK, MATTE THIN,
PHOTO PLAIN, or FINE ART PAPER. Then press the Enter
8. Press the Back/Left l button.
User's Guide
button to register the paper number.
button.
The Control Panel
113