Printing A Status Sheet; Maintenance Mode; Maintenance Mode Setting Procedure - Epson Stylus Pro 3800 User Manual

EPSON Stylus Pro 3800

Printing a status sheet

While in Menu mode, you can print a status sheet to see the current default values. To print
a status sheet, follow the steps below.
1. Make sure that paper is loaded in the printer.
2. Press the Menu/Right r button to enter Menu mode.
3. Press the Paper Feed/Down d or Ink Cover Open/Up u button to display
TEST PRINT, and then press the Menu/Right r button.
4. Press the Paper Feed/Down d or Ink Cover Open/Up u button to display
STATUS SHEET, and then press the Menu/Right r button.
5. Press the Enter
After printing is finished, the printer exits Menu mode and returns to the READY status.

Maintenance Mode

Maintenance mode setting procedure

This section describes how to enter Maintenance mode and how to make settings with the
buttons on the control panel.
To make the Maintenance mode settings, follow the steps below.
Note:
Press the Back/Left l button to return to the previous step.
1. Enter Maintenance mode
Confirm the printer is turned off first. While pressing and holding the Cancel/Reset +
button, press the Power P button to turn on the printer.
2. Select an item
Press the Paper Feed/Down d or Ink Cover Open/Up u button to select a desired
item.
3. Set the item
Press the Menu/Right r button to enter the selected item. The first parameter is
displayed on the LCD panel.
User's Guide
button to start printing a status sheet.
116
The Control Panel