Epson Stylus Pro 3800 User Manual page 114

EPSON Stylus Pro 3800
9. Select PLATEN GAP, and then press the Menu/Right r button. Press the Paper
Feed/Down d or Ink Cover Open/Up u button to select NARROW, STANDARD, WIDE, or
WIDER. Then press the Enter
10. Press the Back/Left l button.
11. Select THICKNESS PATTERN, and then press the Menu/Right r button. Press the
Enter
Paper thickness test pattern example:
12. Examine the printed pattern to determine which set of lines are aligned (showing the
smallest gap), and note the corresponding number.
13. After the pattern is printed, THICKNESS NUMBER appears. Press the Paper
Feed/Down d or Ink Cover Open/Up u button to select the number noted in step 12,
and then press the Enter
14. Press the Back/Left l button.
15. Select PAPER FEED ADJUST A, and then press the Menu/Right r button. Press the
Paper Feed/Down d or Ink Cover Open/Up u button to set the paper feed amount of
the printable area (A area in the illustration below), and then press the Enter
16. Press the Back/Left l button.
User's Guide
button to print the paper thickness test printing pattern.
1 2 3 4 5
button to save the selected value.
button to save the selected platen gap setting.
8
7 9 10 11 12
6
A
13 14 15
The Control Panel
button.
114