Epson Stylus Pro 3800 User Manual page 115

EPSON Stylus Pro 3800
17. Select PAPER FEED ADJUST B, and then press the Menu/Right r button. Press the
Paper Feed/Down d or Ink Cover Open/Up u button to set the paper feed amount of
the bottom area that is 2 or 3 cm from the bottom of the paper (B area in the illustration
below), and then press the Enter
18. Press the Back/Left l button.
19. Select DRYING TIME, and then press the Menu/Right r button. Press the Paper
Feed/Down d or Ink Cover Open/Up u button to select the time in seconds, and then
press the Enter
20. After registering the paper settings, press the Cancel/Reset + button to exit Menu
mode.
Selecting the registered settings
To select the registered settings, follow the steps below.
1. Press the Menu/Right r button to enter Menu mode.
2. Press the Paper Feed/Down d or Ink Cover Open/Up u button to display
CUSTOM PAPER, and then press the Menu/Right r button.
3. Press the Paper Feed/Down d or Ink Cover Open/Up u button to select the number
registered that you want to use. If you select STANDARD, the printer prints data according
to the driver settings. If you select No. X, the control panel settings override the driver
settings.
4. Press the Enter
LCD panel.
5. Press the Cancel/Reset + button to exit Menu mode.
User's Guide
button to save the selected value.
button. If you select No. X, the number you selected appears on the
button.
B
115
The Control Panel