Epson Stylus Pro 3800 User Manual page 153

EPSON Stylus Pro 3800
For Windows 2000
1. Click the Start button, point to Settings and select Printers.
2. Right-click EPSON Stylus Pro 3800 in the Printers window.
3. Select Set As Default, then close the Printers window.
For Mac OS X
Make sure that the printer driver Stylus Pro 3800 is correctly added to the Print Center (for
Mac OS X 10.2.x) or Printer Setup Utility (for Mac OS X 10.3 or later), and the correct one
is selected in the Print Center or the Printer Setup Utility.
Printer port setting does not match the printer connection port (for Windows
only)
To select the printer port, follow the steps below.
For Windows XP x64 and XP
1. Click Start, click Control Panel, click Printers and Other Hardware, and then click
Printers and Faxes.
2. Right-click EPSON Stylus Pro 3800, then select Properties.
3. Click the Ports tab.
4. Make sure that your printer port is selected.
For Windows 2000
1. Click Start, point to Settings, and then select Printers.
2. Right-click EPSON Stylus Pro 3800 in the Printers window, then select Properties.
3. Click the Ports tab.
4. Make sure that your printer port is selected.
User's Guide
153
Problem Solver