Table of Contents
Advertisement
3. Change node associations with new DMGR hostname; execute
4. Change the host name of the WebSphere Partner Gateway components; execute
Note: After successful completion of host name/IP address change, the
deployment manager starts automatically. However, you need to manually start the
node and application servers.
Changing the host name and port number of database
Refer to the appropriate section for detailed steps to change the host name and
port number of database. Ensure that you backup the configuration files before
making any significant changes. For more details, see "Prerequisites" on page 151
section.
Simple mode
Run the command bcgChangeDataSource.bat\sh <New IP/Hostname> <PORTNUMBER>.
This executable is available in the folder <BCG_SIMPLE_HOME/bin>.
Distributed mode
To change the host name and port number of:
v MAS database: run the command bcgChangeMASDataSource.bat\sh <New
v WebSphere Partner Gateway Application database: run the command
Note: If you wish to change just one parameter, specify <None> for the parameter
that should not be changed. For example, to change just the IP address, run the
command bcgChangeDataSource 9.182.10.12 NONE.
Changing the port numbers
Ensure that you backup the configuration files before making any changes. Refer to
"Prerequisites" on page 151 section for more details.
To change the port number, run the command bcgChangePorts.bat <PortType>
<Portno> <ServerType> <HostName>. The port type must be any of the following
values:
bcgChangeDmgrHostname.bat\sh with new Host name/IP address and SOAP
port as input parameters, that is bcgChangeDmgrHostname.bat\sh <New
IP/Hostname> <SOAP PORTNUMBER>. This executable is available in the folder
<Installation directory of hub>/bin.
the following:
a. bcgChangeNodeHostname.bat\sh with with new Host name/IP address
and Current node name as the input parameters, that is,
bcgChangeNodeHostname <New IP/Hostname> <Node name of the machine>.
The executable is available in the folder <BCG_DMGR_HOME>/bin.
b. In the machine where WebSphere Partner Gateway components, run
bcgChangeNodeHostname.bat\sh with new Host name/IP address, DMGR
host name, and DMGR SOAP port as the parameters. The command will be
bcgChangeNodeHostname <New IP/Hostname> <Dmgr IP/hostname> <DMGR SOAP
port>. This executable is available in the folder <BCG_Hub_HOME>/bin.
IP/Hostname> <PORTNUMBER>. This executable is available in the folder
<BCG_HUB_DMGR/bin>.
bcgChangeDataSource.bat\sh <New IP/Hostname> <PORTNUMBER>. This executable
is available in the folder <BCG_HUB_DMGR/bin>.
Chapter 16. Relocation and Redeployment of WebSphere Partner Gateway
153
Advertisement
Table of Contents
