Table of Contents
Advertisement
3. Configure the internal partner and external partner B2B capabilities to be the
4. Establish the partner connections between the internal partner and the external
5. Set the attributes of the connection to optionally specify signing and encryption
If you have sample 3A4 Request XML and 3A4 RNSC XML files in your file
system, you can use the RosettaNet Partner Simulator to exercise all of the internal
routing function. Select the RosettaNet Partner Simulator page and then click
Browse. Select a file from the file system containing the content that you want to
route, and then click Route.
The document is read from the file system and uploaded to the hub. It is passed to
the Document Manager for routing, and the connection that you have configured
in the hub is used.
Uploading and viewing your requests and responses
You must test your system's ability to send requests and responses. The Upload
Document window is used to upload both types of documents.
When you send a request, use the second feature window, View Document Type,
to examine the document to verify that it was processed correctly (it is an open
document pending response). Examine your internal application to verify that the
document was received and processed correctly. Use a text editor to edit the "to"
and destination sections of the request to create a response. Then upload the
response.
When you send a response, you can also use the View Document Type window to
examine the document. It is not necessary to edit a response.
The View Document Type window does not show documents that are pending
acknowledgment.
After the upload completes, the RN PS view changes to the routing results
window, which contains links to the RosettaNet Viewer and the Document Viewer.
These two links are for your convenience. They take you to the two viewers that
you will check for routing results. You should wait a few seconds for the
Document Manager to handle the message before attempting to view the results.
Initiating and viewing document type
About this task
This feature provides a convenient method for testing internal applications by
simulating the initiation and receipt of one-way and two-way RosettaNet PIPs.
To initiate a document type:
1. Click RosettaNet Partner Simulator > Initiate Document Type. The system
2. Click Browse to locate the RosettaNet Service Content document that you want
Source and Receiver of partner 3A4 requests and confirmations that use RNSC
content.
partner to support the scenario you want to simulate.
using the security artifacts that you have placed on your system.
displays the Upload Document window.
to upload. The document must be signed with a digital signature.
Chapter 12. Simulating production traffic
125
Advertisement
Table of Contents
