Table of Contents
Advertisement
Configuring attributes
About this task
If the workstation where the Document Manager is installed is configured with
IPv6 and documents are sent using a destination based on IPv6 protocol, then the
IPv6 address of the workstation must be configured. To configure the workstation
address:
1. Log in to the WebSphere Gateway Console.
2. Go to System Administration > DocMgr Administration > Delivery Manager
3. Click the Editing publishing info properties icon.
4. Type the IPv6 address of the local workstation where the hub is running in the
5. Click Save.
6. For Receiver, go to System Administration > Receiver Administration >
7. Type the IPv6 address of the local workstation where the hub is running in the
8. Click Save.
Attributes.
bcg.router.ipv6.address property.
Note: If more than one instance of document manager exists, leave the
property bcg.router.ipv6.address blank.
Others.
bcg.receiver.ipv6 property.
Note: If more than one instance of receiver exists, leave the property
bcg.receiver.ipv6 blank.
Chapter 8. Support for IPv6
83
Advertisement
Table of Contents
