Table of Contents
Advertisement
require any command line arguments. The Integrated FTP Server is stopped
implicitly when the FTP Management server stops.
Note: This is applicable for all deployment modes.
Starting and stopping the components in a simple distributed
mode system
There are two clusters in a simple distributed mode system:
bcgmasCluster
The messaging cluster that has messaging servers. There has to be at least
one messaging server running for the WebSphere Partner Gateway
components to operate.
bcgserverCluster
The WebSphere Partner Gateway component cluster that has servers
named bcgserver. All three components (console, receiver and router) are
installed on the bcgserver.
The names shown here are default names used by the installer. Be aware that the
installer might have chosen different names and that you must use these names if
the default names were not used.
Starting servers in a simple distributed mode system
Before starting your server in a simple distributed mode system, start the
messaging servers prior to starting the WebSphere Partner Gateway component
servers.
Starting all the servers using the Deployment Manager
About this task
1. Confirm that the node agent is running for each node with the bcgmas server
and the bcgserver installed.
2. Using the Deployment Manager console, select the messaging cluster
bcgmasCluster and click Start.
3. Wait for the bcgmasCluster to start before performing the next step.
4. Select the bcgserverCluster and click Start.
Starting individual servers on each computer
About this task
1. Confirm that the node agent(s) are running for each node with the bcgmas
server and the bcgserver installed.
2. Select the messaging bcgmas server and click Start.
3. Repeat the previous step starting all of the other bcgmas servers.
Note: Wait until at least one of the messaging servers has started before
starting the WebSphere Partner Gateway component servers.
4. Select the bcgserver server and click Start.
5. Repeat step 4 to start all of the required component servers. A cluster can
contain more than one server. You can select any of the servers in the cluster,
and start them.
Chapter 2. Managing the WebSphere Partner Gateway component applications
9
Advertisement
Table of Contents
