IBM E02HRLL-G - WebSphere Partner Gateway Express Administration Manual page 232

Table 47. Client Auth (continued)
Property Name
bcg.ftp.config.listeners. clientauth.port
bcg.ftp.config.listeners. clientauth.implicit-ssl
bcg.ftp.config.listeners. clientauth.ssl.class
bcg.ftp.config.listeners. clientauth.ssl.ssl-protocol
bcg. config.listeners. clientauth.ssl.client-authentication
bcg.ftp.config.listeners. clientauth.data-connection.class
bcg.ftp.config.listeners. clientauth.data-
connection.idle-time
bcg.ftp.config.listeners. clientauth.data-
connection.active.enable
bcg.ftp.config.listeners. clientauth.data-
connection.active.local-address
bcg. config.listeners. clientauth.data-
connection.active.local-port
bcg.ftp.config.listeners. clientauth.data
-connection.passive.address
bcg.ftp.config.listeners. clientauth.data
-connection.passive.ports
bcg.ftp.config.listeners. clientauth.data-
connection.ssl.class
Connection Properties:
All connection properties are editable.
Table 48. Connection Properties
Property Name
bcg.ftp.config.connection-manager.max-connection
bcg.ftp.config.connection-manager.max-login
226
IBM WebSphere Partner Gateway Enterprise and Advanced Editions: Administration Guide
Description
Port of the FTP Server. This is for the default
listener
FTP will be used instead of SSL
Class that handles SSL
Default SSL Protocol. The allowed values are
TLSv1 SSLv3, and SSL_TLS
Note: In FIPS mode, TLSv1 can be optionally
set as the value for
bcg.ftp.config.listeners.default.ssl.ssl-protocol
property to avoid confusion. The steps are as
follows: In WebSphere Partner Gateway
Console, select System Administration > FTP
Administration > Listener Properties >
Default. In non-FIPS mode, the value can be
set to "SSL_TLS", which will enable both SSLv3
and TLSv1 support.
If Client auth is required
Class that handles the Data connection
Connection idle time in seconds
If active connection is enabled for this listener
Local address to listen to in active connections
Local port to listen to for active connections
PASV address
Passive Ports
Class used for SSL
Description
Maximum allowed connections
Maximum logins allowed