Table of Contents
Advertisement
Starting individual servers on each computer
About this task
1. Select the messaging bcgmas server to start and click Start.
2. Repeat the previous step until you have started all of the servers.
3. Select the bcgdocmgr server to start and click Start.
4. Repeat the previous step until you have started all of the servers.
5. Select the bcgreceiver (or bcgconsole) server to start and click Start.
6. Repeat the previous step until you have started all of the servers.
7. Select the bcgconsole (or bcgreceiver) server to start and click Start.
8. Repeat the previous step until you have started all of the servers.
Note: If more than one servers have to be started, then select those servers, and
click Start.
Starting the servers when the Deployment Manager is
unavailable
About this task
Note: Start the servers in the order shown in the previous section.
1. For each node with the bcgmas server and any of the WebSphere Partner
2. Start each WebSphere Partner Gateway server by running the startServer
Note: Start bcgmas server first and then start the rest of the servers.
Note: Ensure that the user you use to start and stop the server is WPG user and is
not the root user.
Stopping servers in a full distributed mode system
It is important to note that the shutdown sequence is the opposite of the startup
sequence. It is as follows:
1. WebSphere Partner Gateway console (or receiver) servers.
2. WebSphere Partner Gateway receiver (or console) servers.
3. WebSphere Partner Gateway document manager servers.
4. Messaging servers.
12
IBM WebSphere Partner Gateway Enterprise and Advanced Editions: Administration Guide
Note: Wait until at least one of the servers has started before starting the
WebSphere Partner Gateway component servers.
Gateway component servers installed make sure that the node agent(s) are
running.
script located in the <WebSphere Partner Gateway Install Dir>/wasND/
Profiles/bcgprofile/bin directory on the computer where the server was
installed. The syntax is:
startServer <server name>
Where server name is bcgmas for starting the messaging server, bcgconsole,
bcgreceiver and bcgdocmgr for the component servers.
Note: The receiver and console servers can be stopped in either order.
Advertisement
Table of Contents
