Yamaha TT-R125(M) Owner's Service Manual page 390

Hide thumbs Also See for TT-R125(M):

Table of Contents

Handlebar holder 2

Bolt (handlebar holder) 3

Align the punched mark a on the handlebar

with the upper surface of the handlebar

holder on the upper bracket.

The handlebar holder should be installed

with the punched mark b forward.

First tighten the bolts on the front side of the

handlebar holder, and then tighten the bolts

on the rear side.

Handlebar grip (left) 1

Apply the adhesive to the handlebar 2.

Before applying the adhesive, wipe off grease

or oil on the handlebar surface a with a lac-

quer thinner.

14 Nm (1.4 m · kg, 10 ft · lb)