Rear Wheel - Yamaha TT-R125(M) Owner's Service Manual

REAR WHEEL AND REAR BRAKE
5 - 13
5. Install:
Springs 1
New
Brake shoes 2
NOTE:
Apply the lithium soap base grease on the
pivot pin.
WARNING
Do not apply grease to the brake shoe lin-
ings.

Rear wheel

1. Install:
Wheel bearing 1
Spacer 2
Wheel bearing 3
Oil seal 4
New
NOTE:
Apply the lithium soap base grease on the oil
seal lip when installing.
Install the bearing with seal facing outward.
Use a socket that matches the outside diam-
eter of the race of the bearing.
Right side of bearing shall be installed first.
Install the oil seal with its manufacture's
marks or numbers facing outward.
CAUTION:
Do not strike the inner race of the bearing.
Contact should be made only with the outer
race.
CHAS