Yamaha YZ250(W)/W1 Owner's Service Manual page 128

1 Brake hose
2 Master cylinder
3 "ENGINE STOP" button lead
4 "ENGINE STOP" button
5 Throttle cable
6 Clutch cable
7 Clamp
8 Cable guide
CABLE ROUTING DIAGRAM
A Install the brake hose so that its pipe portion directs
as shown and lightly touches the projection on the
master cylinder.
B Pass the "ENGINE STOP" button lead in the middle
of the clutch holder.
C Clamp the "ENGINE STOP" button lead to the han-
dlebar.
D Pass the brake hose in front of the number plate
and through the cable guide.
E Pass the clutch cable through the cable guide on
the number plate.
2-18
SPEC